Central Heating Repair North London

In the past few decades Central Heating Systems have improved amazingly. Central Heating 24-7 is here to provide the best central heating installation, repair and servicing in line with these developments. We also provide a central heating bespoke design service. We offer a wide range of services through our team of fully trained and qualified Gas Safe Registered engineers.

You will benefit from our engineers years of experience and their high standards of customer care. Our engineers have a wide range of skills to deal with straightforward or more multifaceted heating problems. If you have a boiler breakdown, need a boiler installation or installation of an unvented hot water tank or heat pump, we at Central Heating 24-7 have engineers to help you. Don’t be afraid to call as we do not use jargon to confuse you.

Central Heating 24-7’s Gas Safe registered plumbers and heating engineers are experienced in boiler repair and central heating repair on all types of gas boilers and central heating systems.

Central Heating 24-7 Local Central Heating Engineers

Our network of Heating Engineers covers all areas of London and surrounding areas. We will assign a local Gas Safe registered plumber to visit you normally within the same day or the next day. We will arrange a visit by an experienced plumber in your area whether it be Enfield | Chelsea | Hampstead | Pimlico or any other area in London. These engineers have many years of central heating experience and are ready to quote for your work whether it be a central heating installation or a boiler repair. Every Gas Safe registered plumber working with us will be happy to also advise you on any area of heating, including energy efficient products and systems and renewable energy.

Central Heating 24-7 provides services such as:

1. Replace hot water tanks

2. Central heating installations

3. Install heating controls Install water heaters

4. Boiler Servicing

5. Install Unvented cylinders

6. Fix and install all types of Radiators

7. Power flush the radiators and the central heating system

8. Install decorative radiators

9. Install towel warmers

10. Install TRVs (Thermostatic Radiator Valves)

11. Install Megaflo systems

12. Landlord Gas Safety certificates

Central Heating 24-7 

Central Heating Fault Finding

The Gas Safe registered plumber will go through a rigorous testing cycle to analyse your central heating and boiler to find the source of the fault. As part of examining the boiler and the central heating system together with the connections, the plumber will check:

1. Flow and return pipes (to/from the boiler)  

2. Boiler flame firing

3. Flue positioning and heat

4. Lockout on the boiler

5. FCU fuse (power to system)

6. Controls (programmers, thermostats)

7. Boiler pump

8. System pressure

9. Condition of radiators

10. Condition of pipe work

11. Condition of valves and other fittings

Advice on the safes and most feasible resolution will be offered to you once the heating engineer has clearly established the problem.

Note: In many cases it is more cost effective to replace your boiler rather than repair it, as the energy savings from new boilers can be surprising.

Central Heating Installations

Central heating system installations typically involve a new high efficiency boiler, new radiators, new heating controls and pipe work.

Boiler installations can vary greatly between the different types and makes of boilers and the unique requirement in each property.

As an example we have drawn up this high level check list for a supply and installation of a typical central heating system with a combi boiler:

• Drain and remove old boiler (if exists)

• Install new combi boiler (including flue)

• Connect flow and return pipe-work to the boiler

• Connect water pipes (hot and cold) between the boiler and the taps

• Hang heating radiators on the walls

• Connect pipe work to radiators

• Install controls (timers, room thermostat)

• Power-flush the system

• Put inhibitor into the system to inhibit any scale build up

• Test the system under pressure

• Notify Gas Safe (formerly Corgi) and issue all required certificates

• Clean all rubbish and leave the property tidy